How Standard Rail Mounted Solar Work | Custom Mounting Rails For Solar Panels

 Different materials of roof adopt different solar installation system. Is solar rail mounting system fit for you? Art Sign share you detail.

​

This method uses a flashing to attach onto the existing rooftop. The flashing is similar to what would be used for a standard roof vent. An “L” feet or support component is then fastened to this flashing and holds the aluminum/steel rail 2-4 inches above the rooftop, upon which the solar panels are mounted.


The Pros for Standard Rail Mounting:

Can be used with almost any KW module in the colar of your choice.

Rails themselves are available in silver/black to blend with the rooftop if desired

Many manufacturers offer flashing to help blend in with the rooftop and keep rodents out

Conduit/wires can be run through the rooftop or across the rooftop.

Art Sign have been around for a long time and have long histories of success.


Custom Mounting Rails For Solar Panels

The Cons for Standard Rail Mounting:

Rails add additional weight to the roof which could mean older/less engineered buildings may not support the additional load

The solar system is more prominently displayed as it sits several inches above the shingles

When installed without flashing, equipment is more accessible to rodents/weather

Mounting Rails For Solar Panels

Summary:

Overall, standard rail mounted solar offers the most flexibility when it comes to system design, and with its long history of success in the industry, it continues to be the popular choice for homeowners. These systems typically stand out on a rooftop, although there is equipment available that is designed to blend with the existing roof.


Welcome to send us any inquiry and we will offer you good price and best service and excellent products.

Email: sales@artsign.net.cn Whatsapp/ Wechat/ Skype: +86 180 3023 5875


评论

发表评论

此博客中的热门博文

A brief introduction to the earthing washer/grounding clips in solar mounting system

图片
  Grounding PV modules  to reduce or eliminate shock and fire hazards is necessary and required by Electrical Code in countries in USA, Australia etc. The grounding guidelines of the Code es sentially state that all electrical equipment is to be grounded by means of direct attachment to an equipment grounding conductor. This can be done in many different ways. The traditional method is to use the ground bond point of each  solar panel  and connect all the panels together with heavy gauge bare copper wire. This approach can be difficult, time-consuming and costly. Some of the difficulties in grounding PV modules arise from the fact that copper conductors are typically used for electrical connections while the module frames are generally made of aluminum. The incompatibility of copper and aluminum was discovered from numerous fires in houses wired with aluminum wiring in the 1970’s. Copper and aluminum will also react and corrode. The surfaces of aluminum frames are anodized or have powd
阅读全文

Three popular rail for pitched roof | sic-solar.com

图片
  High Quality solar aluminum rail for solar panel install.   SIC   provides different kinds of mounting rail to meet requirements from various customers. Below three type rails are very popular between our customers. ​ 1.  Side mountable aluminium rail Smart patented rail design--"Tilt in Module" could be slide in at any position of rail. 2.  40*40 mounting rail High efficiency design, which is cooperate with quick mount mid and end clamp to save installation time. 3.  Mini rail   /  Short rail Raliless design can reduce the weight on the roof, meanwhile can help our customers to save more cost.
阅读全文

How to install solar panels on corrugated metal roofing | sic-solar.com

图片
  Can   solar panels   be mounted on a metal roof? For sure, metal roof is one of the best roof material to install solar panels, due to its durability and easy for installation. Either framed or frameless solar panels could be mounted, and the shadows of panels could keep your home cool during the summer. The Metal roof have various types. The corrugated steel roof is the basic type, which you can see everywhere. To fix solar panels on it, the solar mounting brackets need to penetrate the roof sheet and fix into the wooden or steel beam directly by screws or hanger bolts. Details as follow. 1.  L feet+self-tapping screws 2.  L feet+Solar hanger bolt L feet is widely used for its high adaptability, which do not have request on the size of metal roof sheet. For some project, below alu clamp will be developed to better adapt with the corrugated steel roof. But it is not proposed due to its unique adaptability.
阅读全文