Solar mounting system

  GeneralIntroduction: Antaisolar  standing seam roof mounting system  is an convenient and ideal solar roof solution. Made of anodized aluminum 6005-T6 and SUS 304, Klip lok 700 roof clamp enables less installation time and offers secure fastening and water tightness without penetrating the roof sheet. Here is the installation guide of Klip lok 700 roof clamp for your information. InstallationProcess: a. Fixing the Klip lok 700 roof clamp b. Fixing the earthing clip c. Placing the solar panels and use the end clamps to fix the panel d. Using the mid clamps to fix the panel e. Placing the entire panel from bottom to top f. Installing the grounding lug More installation details at  https://www.youtube.com/watch?v=OQr8xVhJE40 Installation precautions: Ø The bolts of the Klip lok 700 roof clamp are pre-assembled, and can be easily tightened after adjusting the clamp position. Ø The rubber pad at the bottom of the Klip lok 700...

  With the rapid development of distributed photovoltaic in China, the roof has become one of the most important carriers to install photovoltaic power station. Among them, the metal sheet roof is a common pitched type with a slope of 10% or 5%, which is made o f corrugated steel sheet or trapezoidal metal sheet, etc. Precautions in the design of  metal roof mounting system 1.Define the form and laying method of PV modules, as well as the roof type of the original building. 2.Make clear the structure form of the original building and check the main structure and stress member. The metal sheet roof is required to bear 0.15kn/m2 under the condition. 3.Generally, the metal sheet needs to be replaced every 10-15 years. Therefore, the metal sheet that has been used for more than its service life needs to be replaced. 4.If the owner has high waterproof requirements for the roof, or the roof is dilapidated, it is necessary to do waterproof and anti-corrosion treatment on the roof bef...

  GeneralIntroduction: Antaisolar  standing seam roof mounting system  is an convenient and ideal solar roof solution. Made of anodized aluminum 6005-T6 and SUS 304, Klip lok 700 roof clamp enables less installation time and offers secure fastening and water tightness without penetrating the roof sheet. Here is the installation guide of Klip lok 700 roof clamp for your information. InstallationProcess: a. Fixing the Klip lok 700 roof clamp b. Fixing the earthing clip c. Placing the solar panels and use the end clamps to fix the panel d. Using the mid clamps to fix the panel e. Placing the entire panel from bottom to top f. Installing the grounding lug More installation details at  https://www.youtube.com/watch?v=OQr8xVhJE40 Installation precautions: Ø The bolts of the Klip lok 700 roof clamp are pre-assembled, and can be easily tightened after adjusting the clamp position. Ø The rubber pad at the bottom of the Klip lok 700...