Solar Panel Mounting | Solar PV Mounting Systems Manufacturer

 ​Solar panel (also known as pv panels) mounting come in all sorts of shapes and sizes depending on their purpose. Some can be stand-alone, where as others can be mounted on a pole enabling them to track the sun throughout the day. Here I will advise the main types pv panel mounting and what is best for your solar power system.


There are 3 main types of pv panel mounts.

Flush Mounts

Roof - Ground Mounts

Pole Solar Mounts

Each has their advantages and disadvantages to take into consideration before you make your decision how to mount your domestic solar panels.

FLUSH MOUNTS

This is the cheapest and easiest way to mount your domestic solar panels. You can do this by fastening a couple of metal brackets either side of your solar panel and raising it a few inches from the surface underneath.

Advantages: Don't cost much, simple to install, low wind resistance and light weight. Suitable small sized panels on roofs and those you see a top of RV's (Recreational vehicles)

Disadvantages: Not suitable for large solar panels, can not be used in some types of roofs. No flexibility in tilt or orientation. Solar panel(s) have to be pre-wired before installing.

Solar PV Mounting Systems

ROOF - GROUND MOUNTS As the name implies this type of mount can be used on both your roof and on the ground. It consists of a metal triangular frame with a set of telescopic legs. This enables you to change the angle your solar panel is pitched at. This allows you to optimize their vertical orientation for greatest amount of solar exposure during the day.


POLE MOUNTS

Pole mounts come in three types.

Top of pole mounts

Side of pole mounts

Poll tracking mounts

pole solar mounts

Top of Pole Mounts are made up of a rack and rail component that is fastened to a metal sleeve that sits on top of the pole

Sides of Pole Mounts are essentially similar to top of pole mounts the only difference being the mechanism is fastened side on

Again Tracking Pole Mounts are similar to top of pole mounts, the only difference being they have a device allowing them to follow the suns daily path.

Advantages: Your domestic solar panels are easy to wire up due to the easy access to them. Panels can be raised to a height where by they avoid shading from other obstacles.

Disadvantages: construction costs, digging a hole and making sure your pole is anchored securely.

pv mounting brackets

If you have any inquiry or question about pv mounting brackets, welcome to contact Art Sign.
Email: sales@artsign.net.cn Whatsapp/Wechat/Skype: + 86 180 3023 5875   Art Sign

评论

发表评论

此博客中的热门博文

How to Install Standing Seam Roof Mounting System by Klip lok 700 Roof Clamp?

图片
  GeneralIntroduction: Antaisolar  standing seam roof mounting system  is an convenient and ideal solar roof solution. Made of anodized aluminum 6005-T6 and SUS 304, Klip lok 700 roof clamp enables less installation time and offers secure fastening and water tightness without penetrating the roof sheet. Here is the installation guide of Klip lok 700 roof clamp for your information. InstallationProcess: a. Fixing the Klip lok 700 roof clamp b. Fixing the earthing clip c. Placing the solar panels and use the end clamps to fix the panel d. Using the mid clamps to fix the panel e. Placing the entire panel from bottom to top f. Installing the grounding lug More installation details at  https://www.youtube.com/watch?v=OQr8xVhJE40 Installation precautions: Ø The bolts of the Klip lok 700 roof clamp are pre-assembled, and can be easily tightened after adjusting the clamp position. Ø The rubber pad at the bottom of the Klip lok 700 roof clamp needs to be fixed tightly to the metal roof surface.
阅读全文

How to install solar panels on corrugated metal roofing | sic-solar.com

图片
  Can   solar panels   be mounted on a metal roof? For sure, metal roof is one of the best roof material to install solar panels, due to its durability and easy for installation. Either framed or frameless solar panels could be mounted, and the shadows of panels could keep your home cool during the summer. The Metal roof have various types. The corrugated steel roof is the basic type, which you can see everywhere. To fix solar panels on it, the solar mounting brackets need to penetrate the roof sheet and fix into the wooden or steel beam directly by screws or hanger bolts. Details as follow. 1.  L feet+self-tapping screws 2.  L feet+Solar hanger bolt L feet is widely used for its high adaptability, which do not have request on the size of metal roof sheet. For some project, below alu clamp will be developed to better adapt with the corrugated steel roof. But it is not proposed due to its unique adaptability.
阅读全文

A brief introduction to the earthing washer/grounding clips in solar mounting system

图片
  Grounding PV modules  to reduce or eliminate shock and fire hazards is necessary and required by Electrical Code in countries in USA, Australia etc. The grounding guidelines of the Code es sentially state that all electrical equipment is to be grounded by means of direct attachment to an equipment grounding conductor. This can be done in many different ways. The traditional method is to use the ground bond point of each  solar panel  and connect all the panels together with heavy gauge bare copper wire. This approach can be difficult, time-consuming and costly. Some of the difficulties in grounding PV modules arise from the fact that copper conductors are typically used for electrical connections while the module frames are generally made of aluminum. The incompatibility of copper and aluminum was discovered from numerous fires in houses wired with aluminum wiring in the 1970’s. Copper and aluminum will also react and corrode. The surfaces of aluminum frames are anodized or have powd
阅读全文