6600V Triplex Cross-Linked Polyethylene Insulated Vinyl Sheath Cable | Sunkean.com

 CV cable is the abbreviation of "cross-linked polyethylene insulated vinyl sheathed cable", which is called "cross-linked polyethylene insulated vinyl sheathed cable" in English. Cross-linked polyethylene can provide the maximum allowable temperature up to 90°C, and the short-circuit allowable temperature is up to 230°C. It is a material with excellent chemical resistance and water resistance. The CV cable manufactured based on this has high durability, Can be widely used in factories, parking lots, outdoors, etc.


CVT Cable Overview

JIS standard product. It is a power cable that is twisted from a single core CV cable and is used as a cable for all power transmission and distribution from low voltage to high voltage, sometimes referred to as a three-conductor cable on construction sites. Compared with 3-core CV, it has no intervention, lighter weight, more allowable current, slightly better heat dissipation, and easier to bend. Since the wires are protected by sheaths, there is also a feature that even if a single-wire grounding accident occurs in the cable, it will not easily spread or migrate to a short circuit between wires.


Application of CVT Cable

It is widely used as a power cable and has acquired great reliability as a consumer premises cable. It can be used not only for residential, commercial facilities and other buildings, but also for commercial facilities, factories, scientific research facilities, schools, hospitals and other buildings of any type and size.


SUNKEAN CVT CABLE DATA SHEET:

Conductor

Insulation thickness

(internal semiconductor including layers)

(mm)

Insulation

O.D.

(mm)


Jacket

thickness

(mm)

CableO.D.(single core)

(mm)

Twisted Cable O.D.

(mm)

Cable weight

(kg/km)

Conductor ResistanceMax(20°C)

(Ω/km)



Insulation resistance
(MΩ･km)



Withstand voltage test
(kV)


Capacitance (normal temperature)

(Reference test)

(μF/km)

Cross section

(mm2)

Shape

O.D.

(mm)

38

Circular compression

7.3

4.0

15.3

2.1

21.5

46.5

2360

0.491

2000

17

0.32

60

9.3

17.3

2.2

24.0

51.5

3145

0.311

0.37

100

12.0

20.0

2.4

26.0

56.0

4040

0.187

1500

0.45


If you want to know more details about CVT cables, please contact our sales representative, thank you. wendy@ske-tech.com


评论

发表评论

此博客中的热门博文

A brief introduction to the earthing washer/grounding clips in solar mounting system

图片
  Grounding PV modules  to reduce or eliminate shock and fire hazards is necessary and required by Electrical Code in countries in USA, Australia etc. The grounding guidelines of the Code es sentially state that all electrical equipment is to be grounded by means of direct attachment to an equipment grounding conductor. This can be done in many different ways. The traditional method is to use the ground bond point of each  solar panel  and connect all the panels together with heavy gauge bare copper wire. This approach can be difficult, time-consuming and costly. Some of the difficulties in grounding PV modules arise from the fact that copper conductors are typically used for electrical connections while the module frames are generally made of aluminum. The incompatibility of copper and aluminum was discovered from numerous fires in houses wired with aluminum wiring in the 1970’s. Copper and aluminum will also react and corrode. The surfaces of aluminum frames are anodized or have powd
阅读全文

Three popular rail for pitched roof | sic-solar.com

图片
  High Quality solar aluminum rail for solar panel install.   SIC   provides different kinds of mounting rail to meet requirements from various customers. Below three type rails are very popular between our customers. ​ 1.  Side mountable aluminium rail Smart patented rail design--"Tilt in Module" could be slide in at any position of rail. 2.  40*40 mounting rail High efficiency design, which is cooperate with quick mount mid and end clamp to save installation time. 3.  Mini rail   /  Short rail Raliless design can reduce the weight on the roof, meanwhile can help our customers to save more cost.
阅读全文

How to install solar panels on corrugated metal roofing | sic-solar.com

图片
  Can   solar panels   be mounted on a metal roof? For sure, metal roof is one of the best roof material to install solar panels, due to its durability and easy for installation. Either framed or frameless solar panels could be mounted, and the shadows of panels could keep your home cool during the summer. The Metal roof have various types. The corrugated steel roof is the basic type, which you can see everywhere. To fix solar panels on it, the solar mounting brackets need to penetrate the roof sheet and fix into the wooden or steel beam directly by screws or hanger bolts. Details as follow. 1.  L feet+self-tapping screws 2.  L feet+Solar hanger bolt L feet is widely used for its high adaptability, which do not have request on the size of metal roof sheet. For some project, below alu clamp will be developed to better adapt with the corrugated steel roof. But it is not proposed due to its unique adaptability.
阅读全文