How to Install Standing Seam Roof Mounting System by TYN-47 Roof Clamp?

 General Introduction:

The railless metal roof mounting system facilitates the rapid mounting of framed PV modules on metal sheet roofs with minimum thickness 0.8mm, only four components are required to install the modules directly to the roof. A base mounting clip is 100mm or 140mm long, which is easy to carry and attach to almost all trapezoidal and sandwich roofs. The EPDM sheet is in the package to seal the screw against the metal sheet.


railless metal roof mounting system


Installation Process:

a.Fixing the TYN-47 roof clamp according to layout

b. Placing the solar panels and use the end clamps to fix the panels

c. Using the mid clamps to fix the panels

d. Placing the entire panel from bottom to top

For more installation details, please view the video below



Antaisolar roof solar mounting systems



Installation precautions:

***Measuring the width of the standing seam to ensure that the roof clamps can match with it

***The three self-tapping screws of the TYN-47 roof clamp are pre-assembled, and can be easily fastened after adjusting the clamp position.

***The EPDM pad is sealed at the bottom of the TYN-47 roof clamp before shipment,  offering water-proof protection after installation.

***It needs to check the connection of the TYN-47 roof clamps and other connectors regularly especially when strong wind will come.


For more installation details, please view the video below


Besides the TYN-47 roof clamp, Antaisolar can offer various types of roof clamps according to different roof sheet. Made of AL6005-T6, all aluminum solar roof clamps are lightweight and easy for installing. In Commercial and Industrial solar sector, metal roof mounting system is widely applied in transition to solar energy.  It’s recommended to choose a solar racking supplier that has vast expertise in solar industry and proven track record , so as to rest assure that solar mounting system is stable enough during the life-span.


To learn more about Antaisolar roof solar mounting systems, please check out our Project References at https://www.antaisolar.com/roof-mounting_nc3



评论

发表评论

此博客中的热门博文

A brief introduction to the earthing washer/grounding clips in solar mounting system

图片
  Grounding PV modules  to reduce or eliminate shock and fire hazards is necessary and required by Electrical Code in countries in USA, Australia etc. The grounding guidelines of the Code es sentially state that all electrical equipment is to be grounded by means of direct attachment to an equipment grounding conductor. This can be done in many different ways. The traditional method is to use the ground bond point of each  solar panel  and connect all the panels together with heavy gauge bare copper wire. This approach can be difficult, time-consuming and costly. Some of the difficulties in grounding PV modules arise from the fact that copper conductors are typically used for electrical connections while the module frames are generally made of aluminum. The incompatibility of copper and aluminum was discovered from numerous fires in houses wired with aluminum wiring in the 1970’s. Copper and aluminum will also react and corrode. The surfaces of aluminum frames are anodized or have powd
阅读全文

Three popular rail for pitched roof | sic-solar.com

图片
  High Quality solar aluminum rail for solar panel install.   SIC   provides different kinds of mounting rail to meet requirements from various customers. Below three type rails are very popular between our customers. ​ 1.  Side mountable aluminium rail Smart patented rail design--"Tilt in Module" could be slide in at any position of rail. 2.  40*40 mounting rail High efficiency design, which is cooperate with quick mount mid and end clamp to save installation time. 3.  Mini rail   /  Short rail Raliless design can reduce the weight on the roof, meanwhile can help our customers to save more cost.
阅读全文

How to install solar panels on corrugated metal roofing | sic-solar.com

图片
  Can   solar panels   be mounted on a metal roof? For sure, metal roof is one of the best roof material to install solar panels, due to its durability and easy for installation. Either framed or frameless solar panels could be mounted, and the shadows of panels could keep your home cool during the summer. The Metal roof have various types. The corrugated steel roof is the basic type, which you can see everywhere. To fix solar panels on it, the solar mounting brackets need to penetrate the roof sheet and fix into the wooden or steel beam directly by screws or hanger bolts. Details as follow. 1.  L feet+self-tapping screws 2.  L feet+Solar hanger bolt L feet is widely used for its high adaptability, which do not have request on the size of metal roof sheet. For some project, below alu clamp will be developed to better adapt with the corrugated steel roof. But it is not proposed due to its unique adaptability.
阅读全文