Why choose Adjustable Tilt Mounting System | Antaisolar.com

 Adopted for acquiring more power generation, adjustable tilt roof mounting system is one of the best field assembled, roof-mount available for commercial and residential solar installations.


adjustable tilt roof mounting system


Featured with tilt angle range covering 10-15°,15-30°, 30-60°, it allows for project-specific adjustments according to best local installation inclination calculated, then all arrays are fixedly installed at this inclination. Currently, it is widely used in flat roof power stations in Australia market.


According to on site terrain , different foot option is available such as combined with roof clamp or roof penetration directly.



Fast and trouble-free installations with pre-assembled before shipment and easy-understanding installation demo by provider-Antaisolar. Modular design for local distribution for its range of adjustable suits for different latitude requirements.


The unique adaptation of AL6005-T6 material offering highest resistance and rugged durability for whole project compared with AL6005-T5 that is commonly used inside industry. The adjustable tilt roof Mount Rack installs quickly, features similar-sized hardware and requires only standard tools and equipment for assembly, which can be assembled in a logical, step-by-step manner by crews of nearly any skill level.


With best-in-class engineering and significant expertise, Antaisolar offers a variety of solar racking solutions mounted on roof or ground. The adjustable tilt solar bracket is favored by its flexibility for roof mounting to achieve better power generation. Click the link to see relevant projects at here: https://www.antaisolar.com/news/searchpcb

评论

发表评论

此博客中的热门博文

How to install solar panels on corrugated metal roofing | sic-solar.com

图片
  Can   solar panels   be mounted on a metal roof? For sure, metal roof is one of the best roof material to install solar panels, due to its durability and easy for installation. Either framed or frameless solar panels could be mounted, and the shadows of panels could keep your home cool during the summer. The Metal roof have various types. The corrugated steel roof is the basic type, which you can see everywhere. To fix solar panels on it, the solar mounting brackets need to penetrate the roof sheet and fix into the wooden or steel beam directly by screws or hanger bolts. Details as follow. 1.  L feet+self-tapping screws 2.  L feet+Solar hanger bolt L feet is widely used for its high adaptability, which do not have request on the size of metal roof sheet. For some project, below alu clamp will be developed to better adapt with the corrugated steel roof. But it is not proposed due to its unique adaptability.
阅读全文

How to Install Standing Seam Roof Mounting System by Klip lok 700 Roof Clamp?

图片
  GeneralIntroduction: Antaisolar  standing seam roof mounting system  is an convenient and ideal solar roof solution. Made of anodized aluminum 6005-T6 and SUS 304, Klip lok 700 roof clamp enables less installation time and offers secure fastening and water tightness without penetrating the roof sheet. Here is the installation guide of Klip lok 700 roof clamp for your information. InstallationProcess: a. Fixing the Klip lok 700 roof clamp b. Fixing the earthing clip c. Placing the solar panels and use the end clamps to fix the panel d. Using the mid clamps to fix the panel e. Placing the entire panel from bottom to top f. Installing the grounding lug More installation details at  https://www.youtube.com/watch?v=OQr8xVhJE40 Installation precautions: Ø The bolts of the Klip lok 700 roof clamp are pre-assembled, and can be easily tightened after adjusting the clamp position. Ø The rubber pad at the bottom of the Klip lok 700...
阅读全文

A brief introduction to the earthing washer/grounding clips in solar mounting system

图片
  Grounding PV modules  to reduce or eliminate shock and fire hazards is necessary and required by Electrical Code in countries in USA, Australia etc. The grounding guidelines of the Code es sentially state that all electrical equipment is to be grounded by means of direct attachment to an equipment grounding conductor. This can be done in many different ways. The traditional method is to use the ground bond point of each  solar panel  and connect all the panels together with heavy gauge bare copper wire. This approach can be difficult, time-consuming and costly. Some of the difficulties in grounding PV modules arise from the fact that copper conductors are typically used for electrical connections while the module frames are generally made of aluminum. The incompatibility of copper and aluminum was discovered from numerous fires in houses wired with aluminum wiring in the 1970’s. Copper and aluminum will also react and corrode. The surfaces of aluminum frames are an...
阅读全文