Australia solar aluminum ground mount | Artsignenergy.com

 Art Sign company is the designer and producer of aluminum and steel products.We supply rooftop and open filed mounting structure for solar panel, with quality material aluminum and carbon steel. Today we talk about our solar case study in Australia-solar aluminum ground mount.


open filed mounting structure for solar panel


This solar structure in on solid in the field and it is a special structure type. The below pictures for you ref about this type solar structure installation. And then I will introduce you about the information from the picture.


solar aluminum ground mount


As you saw in the picture, it is not a signal aluminum structure, it has steel solar components. Near the solar panel we used is V structure to support solar panel and then connect with steel solar components to contact the ground base kit.

Regarding the aluminum ground mount, we have many types for different kinds of ground foundation. Especially today talking solar aluminum ground mount V structure. e both have V structure and K structure for the ground mount, they will be pre-assembled which saving the installtion time and labor cost. Also we output many solar aluminum ground mount to many different countries. Below is our other countries’ case study.


steel solar components

Saudi Arabia


Solar aluminum ground mount

Nepal Jomsom airport


aluminum ground mount

Mali


And so on many cases. This design is more stable and stronger and the same mounting system can be installed landscape panel or portrait panel.


More information about solar brackets, pls contact Bonnie, she will provide more details to you about solar mount structure. Email: bonnie@artsign.net.cn Tel:008618396005809.

评论

发表评论

此博客中的热门博文

How to Install Standing Seam Roof Mounting System by Klip lok 700 Roof Clamp?

图片
  GeneralIntroduction: Antaisolar  standing seam roof mounting system  is an convenient and ideal solar roof solution. Made of anodized aluminum 6005-T6 and SUS 304, Klip lok 700 roof clamp enables less installation time and offers secure fastening and water tightness without penetrating the roof sheet. Here is the installation guide of Klip lok 700 roof clamp for your information. InstallationProcess: a. Fixing the Klip lok 700 roof clamp b. Fixing the earthing clip c. Placing the solar panels and use the end clamps to fix the panel d. Using the mid clamps to fix the panel e. Placing the entire panel from bottom to top f. Installing the grounding lug More installation details at  https://www.youtube.com/watch?v=OQr8xVhJE40 Installation precautions: Ø The bolts of the Klip lok 700 roof clamp are pre-assembled, and can be easily tightened after adjusting the clamp position. Ø The rubber pad at the bottom of the Klip lok 700 roof clamp needs to be fixed tightly to the metal roof surface.
阅读全文

How to install solar panels on corrugated metal roofing | sic-solar.com

图片
  Can   solar panels   be mounted on a metal roof? For sure, metal roof is one of the best roof material to install solar panels, due to its durability and easy for installation. Either framed or frameless solar panels could be mounted, and the shadows of panels could keep your home cool during the summer. The Metal roof have various types. The corrugated steel roof is the basic type, which you can see everywhere. To fix solar panels on it, the solar mounting brackets need to penetrate the roof sheet and fix into the wooden or steel beam directly by screws or hanger bolts. Details as follow. 1.  L feet+self-tapping screws 2.  L feet+Solar hanger bolt L feet is widely used for its high adaptability, which do not have request on the size of metal roof sheet. For some project, below alu clamp will be developed to better adapt with the corrugated steel roof. But it is not proposed due to its unique adaptability.
阅读全文

A brief introduction to the earthing washer/grounding clips in solar mounting system

图片
  Grounding PV modules  to reduce or eliminate shock and fire hazards is necessary and required by Electrical Code in countries in USA, Australia etc. The grounding guidelines of the Code es sentially state that all electrical equipment is to be grounded by means of direct attachment to an equipment grounding conductor. This can be done in many different ways. The traditional method is to use the ground bond point of each  solar panel  and connect all the panels together with heavy gauge bare copper wire. This approach can be difficult, time-consuming and costly. Some of the difficulties in grounding PV modules arise from the fact that copper conductors are typically used for electrical connections while the module frames are generally made of aluminum. The incompatibility of copper and aluminum was discovered from numerous fires in houses wired with aluminum wiring in the 1970’s. Copper and aluminum will also react and corrode. The surfaces of aluminum frames are anodized or have powd
阅读全文