5 Common Solar panel mounting bracket for Trapezoidal metal roof

Trapezoidal tin roof sheet have been widely used in industry due to its economics. Here we share 5 common solar panel mounting systems for Trapezoidal metal roof.

1. L-feet
This is the most popular solar mounting bracket for Trapezoidal steel roof. It could connected to steel or wooden beam by one Stainless steel self-tapping bolt, which could be also used on sandwich roofing, and corrugated roof.

2. Stainless steel A2 hook
This A2 solar hook will be fixed to metal sheet by 4pcs self-tapping screw. The connection is strong. But the metal sheet spec need to be checked if the hook size could match it.

The alu hook is similar with above A2 solar mounting hook, but it could be customized according to different metal roof sheet, which is also cheaper.

4. Short rail
This is the most cheapest solar panel mounting brackets.
Solar panel could be fixed by Only three components: mid clamps, end clamps and Mini Rail.
The installation is much easier, and the Rail costs have been greatly reduced.

This is the strongest solar panel mounting system. The hanger bolt will be fixed to the wooden beam or steel beam directly. For sure, the costs is also the highest one.

Metal roof solar mounting systems

All above brackets are penetrated solution. PV Non penetrating roof mount need to be checked according to your specific project info. Pls contact us to get the customized offer.

评论

发表评论

此博客中的热门博文

How to Install Standing Seam Roof Mounting System by Klip lok 700 Roof Clamp?

图片
  GeneralIntroduction: Antaisolar  standing seam roof mounting system  is an convenient and ideal solar roof solution. Made of anodized aluminum 6005-T6 and SUS 304, Klip lok 700 roof clamp enables less installation time and offers secure fastening and water tightness without penetrating the roof sheet. Here is the installation guide of Klip lok 700 roof clamp for your information. InstallationProcess: a. Fixing the Klip lok 700 roof clamp b. Fixing the earthing clip c. Placing the solar panels and use the end clamps to fix the panel d. Using the mid clamps to fix the panel e. Placing the entire panel from bottom to top f. Installing the grounding lug More installation details at  https://www.youtube.com/watch?v=OQr8xVhJE40 Installation precautions: Ø The bolts of the Klip lok 700 roof clamp are pre-assembled, and can be easily tightened after adjusting the clamp position. Ø The rubber pad at the bottom of the Klip lok 700 roof clamp needs to be fixed tightly to the metal roof surface.
阅读全文

How to install solar panels on corrugated metal roofing | sic-solar.com

图片
  Can   solar panels   be mounted on a metal roof? For sure, metal roof is one of the best roof material to install solar panels, due to its durability and easy for installation. Either framed or frameless solar panels could be mounted, and the shadows of panels could keep your home cool during the summer. The Metal roof have various types. The corrugated steel roof is the basic type, which you can see everywhere. To fix solar panels on it, the solar mounting brackets need to penetrate the roof sheet and fix into the wooden or steel beam directly by screws or hanger bolts. Details as follow. 1.  L feet+self-tapping screws 2.  L feet+Solar hanger bolt L feet is widely used for its high adaptability, which do not have request on the size of metal roof sheet. For some project, below alu clamp will be developed to better adapt with the corrugated steel roof. But it is not proposed due to its unique adaptability.
阅读全文

A brief introduction to the earthing washer/grounding clips in solar mounting system

图片
  Grounding PV modules  to reduce or eliminate shock and fire hazards is necessary and required by Electrical Code in countries in USA, Australia etc. The grounding guidelines of the Code es sentially state that all electrical equipment is to be grounded by means of direct attachment to an equipment grounding conductor. This can be done in many different ways. The traditional method is to use the ground bond point of each  solar panel  and connect all the panels together with heavy gauge bare copper wire. This approach can be difficult, time-consuming and costly. Some of the difficulties in grounding PV modules arise from the fact that copper conductors are typically used for electrical connections while the module frames are generally made of aluminum. The incompatibility of copper and aluminum was discovered from numerous fires in houses wired with aluminum wiring in the 1970’s. Copper and aluminum will also react and corrode. The surfaces of aluminum frames are anodized or have powd
阅读全文